Iron Man MK6 MK 6 Suit by DaDave on Thingiverse: https://www.thingiverse.com/thing:1779274

Summary:
update 07.01.2018: uploaded sketch for back and helmet.Here are my files for a complete Iron Man MK6 suit.It looks great, but it is NOT comfortable.And because it is halloweentime I added a battledamaged mask for the helmet.Here is a video of the moving faceplate. Special thanks to "redeathray" for checking my code and helping me.https://youtu.be/Wdb1UWU4UAYhttps://youtu.be/P-KLNkn2KAAhttps://youtu.be/ZY1E9p6GItUThe pictures show me trying out all parts.The electronics are not yet completed, but I think you are more interrested in the files.One picture shows a small version of the MK6 helmet as battledamaged. I gonne use it as decoration for Halloween.I prefere the MK3 helmet to wear. I like the look more.You can download it from "jhon De Sousa" on the following link:http://www.thingiverse.com/thing:260152Most parts are founded on the following 24cm high Iron Man MK6 shell figure from "RohitVen". I asked him to rework and publish his files as a costume and he agreed to.http://www.thingiverse.com/thing:1026995The gloves are made of a Papakura file. The glove is originaly made by "zabana" and remixed by "darkside501st". Below the original link for the glove:http://www.therpf.com/showthread.php?t=139470&amp;highlight=hand+zabanaAs arc reactor I used this Modell from "Thaurus":http://www.thingiverse.com/thing:1377484All parts were made for a Prusa I3 with a 220x220x240mm buildplate.If you have any problems or find parts which are to big please contact me and I will do my best to change it.Except of the printed parts, some buckles (printed or bought), elastic strap and a lot of soft foam for a little comfort you will need the following parts:Helm: 4x M4 Bush, MG995 Servo, any arduinoor other micro controller, at least 8x  LED white, 4x M4x10, 4x M3x20, 4x M3 nut, acrylglass, 2x  contactor , (or 1x, depending on the sketch you use)Neck: EVA foam for a comfortable and flexible neck (if you want to make a neck)Chest: acrylglass 2x M4x40, 2x M4 nut,ABS: EVA foam for a comfortable and flexible sidepartsLower arm (each): some springs for a backflipping handplate, M4x20, M4 nutGloves (each): 4x LED White, 1x G4 COB LED spot, 1x contactor (to enable G4 COB as repulsor)Hips: M4x25, M4 nut Thigh: if you want the knee moving / flapping you will need four springs. I used a blow-dryer to make it a Little more comfortable, because they are really to narrow for my legs. But I could not resize them, because then they wont fit to the rest of the costume and it won't look good .Shoe: a lot of foam to make it suitable.Clipmount: it is made to attach the elastc strap. you will need a M4x25 and a M4 nut for each, you can connect the different parts by using a clipsIt might be that some parts to not fit to your body. please check it bevor you print all.I am about 1.8 meters high and I have a weight of 80kg. The following measures may help you:head: 58cmshoulders 53cm (from side to side)chest: 105cmwaist: 90cmhips: 104cmIf you got any questions feel free to ask and massage me.I hope you enjoy it.