See it differently.
01—04
Assembly layers6 / 10
Find a component131 meshes
iClick a part in the 3D view to inspect it. Materials and lighting are presentation treatments; the P01 CAD geometry is unchanged.
Move with the human.
17 POSES
The nominal standing layout uses an 8° arm offset.
Only height is measured. Proportions are estimates, not a body scan. All three variants keep the same stature.
RECORDED DISCRETE SCREEN0BODY PAIRS
0PAD PAIRS
0SHELL PAIRS
Zero detected pairs in this sample is not a safety approval.
Individual joint targetsMANUAL
Right-side joints; torso and head are shared. Adjustments are not live collision-tested.
!These motions are prescribed transforms, not a constrained mechanism or physics simulation. A clear endpoint does not prove a clear path.
Open around you.
PROPOSAL
A fixed rear structure with sequential, outward-opening shells. Reachable mechanical latches. No powered lock keeping you inside.
!This is a proposed sequence using the existing P01 hinge envelopes. Compound hinges, latches and a dressing stand are not modeled. P01 opening collisions remain unresolved; this sequence has not been re-tested.
Ambition. With receipts.
P01
The presentation is new. The evidence below belongs to the original P01 geometry—not a new mechanical certification.
51POSE × BODY
EVALUATIONS
153INTERMEDIATE
SWEEP SAMPLES
6POSITION-ONLY
REACH TARGETS
Development only.Self-donning is not yet demonstrated.
Not casting-ready. Not load-rated.
Available at recorded presets only. Shows the selected body's hits and the nominal shell-pair record. No live collision solver.
Nominal model / recorded pair counts| Pose | Body | Pad | Shell |
|---|
Known blockersShoulder travel · deep elbow flexion · panel opening · real multi-axis joints · fit measurements · load path · casting process.