ENGINEERING / DESIGN D02.2
NOT JUST
A PRETTY RENDER.
The latest design pass gives the opening mechanism and internal systems real, editable geometry.
UNLOADED BENCH STUDIES01 / CLEAR THE OVERLAP. THEN OPEN.
A TWO-STAGE
ACCESS MECHANISM.
A captive guide carries the pivot outward. The sample panel then swings clear. Scrub the actual exported four-part CAD below.
ACTUAL CAD · UNLOADED BENCH STUDY
DRAG TO ORBIT ↔
Interactive rendering is unavailable. All CAD files and recorded results remain available below.
CLOSED / NO LATCH MODELED
02 / SHOW THE BAD PATH, TOO.
A CLEAR POSE
IS NOT A CLEAR PATH.
This independent 2D section compares direct swing against the staged motion. It uses rectangular fixtures, not measured anatomy or the complete suit.
NO OVERLAP IN THIS SAMPLE23.0 mm
The fork collision was real.
So was the revision.
An earlier 3D version let the panel strike the fork during rotation. The revised panel starts beyond the pivot. Its final four-part screen found no positive overlap in 60 positions, checking all six unique part pairs.
No pin, latch, fasteners, guards, hand, clothing, cable sweep or load deflection was included. These results do not clear the original full-body model.
Read every solid check ↗Read the section data ↗03 / THE SUBSYSTEM PARTS EXPLORER
FOURTEEN PARTS.
ONE DEVELOPING SYSTEM.
Inspect the actual CAD meshes, dimensions and purpose. Every part has a STEP file, an STL and a separate print-position STL.
D02.2 / ACTUAL SINGLE-PART CAD
DRAG TO ORBIT ↔
Interactive rendering is unavailable. All CAD files and recorded results remain available below.
SERVICE / D02.2
Electronics tray
Loading CAD data…
- BOUNDING BOX / mm
- —
- CAD TOPOLOGY
- 1 valid solid
- STL SURFACE
- Watertight
File integrity ≠ strength, castability, support-free printing or wearable approval.
04 / THE LEAST TACTICAL ACCESSORY IMAGINABLE
BEVERAGE
SYSTEM: STANDBY.
One optional piece of extremely important equipment. The physical concept is a passive, hand-removal can cradle—not a launcher.
The bench coupon exists. Wearable mounting, retention, spill routing and grasp clearance do not. Start with an empty can on a stand, away from electronics.
SCREEN ANIMATION ONLY · NO HARDWARE CONNECTED
B01 / MANUAL BEVERAGE MODULE
IDBEVERAGE
MODULE
MODULE
CRADLE OCCUPIED / MOCK STATE
NO PRESSURE · NO PROJECTILE · NO RUSHAwaiting one very reasonable hand-off.