Opening sequence
A clear open endpoint exists, but intermediate panel paths collide. Reach targets do not prove usable latches or solo entry.
05 / BUILD LOG & EVIDENCE
NOT JUST A RENDER.
A RECORD OF THE WORK.
P01.4 contains inspectable geometry and discrete geometric screens. Web R44 adds a project site and D01 systems proposals. It does not silently upgrade the original mechanical evidence.
51POSE × BODY EVALUATIONS
153INTERMEDIATE SAMPLES
6POSITION-ONLY REACH TARGETS
0HUMAN LOAD TRIALS
These counts describe digital samples, not independent participants, continuous collision testing, or a physically demonstrated suit.
01 / KNOWN BLOCKERS
The inconvenient results stay visible.
Shoulder & elbow
Intermediate shoulder positions interfere. Deep elbow bend reaches a four-pair conflict in the nominal 130° preset.
Human fit & load path
The broader estimated mannequin exposes underarm issues. Multi-axis mechanisms and a verified path to the ground remain incomplete.
02 / ORIGINAL RECORDED RESULTS
Nominal-body pose screen.
Pair counts, not injury severity or clearance distances. Zero detected pairs in one sample is not a safety approval.
| Preset | Hard / body | Padding envelope | Checked hard / hard |
|---|---|---|---|
| Standing | 0 | 0 | 0 |
| Arms Forward | 0 | 0 | 0 |
| Arms Side 90 | 0 | 0 | 0 |
| Overhead 150 | 0 | 0 | 0 |
| Elbows 130 | 0 | 0 | 4 |
| Reach Forward Bent | 0 | 0 | 2 |
| Seated 95 | 0 | 0 | 0 |
| Half Squat | 0 | 0 | 2 |
| Step Forward | 0 | 0 | 0 |
| Torso Twist 35 | 0 | 1 | 2 |
| Torso Lean 30 | 0 | 0 | 2 |
| Head Turn 60 | 0 | 0 | 0 |
| Head Nod 25 | 0 | 0 | 0 |
| Forearm Rotation | 0 | 0 | 0 |
| Hip Side Step | 3 | 6 | 2 |
| Open Entry Layout | 0 | 0 | 0 |
| Dressing Approach | 0 | 0 | 0 |
Prescribed transforms; estimated rigid-ellipsoid body; approximate 12 mm padding reserve; selected hard-part pairs only. No muscles, tissue, contact pressure, balance, or dynamic force simulation.
03 / REJECTED, NOT RECOMMENDED
THE FIRST SPRING
GEOMETRY
DIDN’T MAKE THE CUT.
The direct elbow-anchor candidate spans 178.7–273.1 mm eye-to-eye in the original sampled geometry and reverses the sign of assistance near 126°. No commercial spring or force was selected.
The separate five-part tabletop elbow study records 136 positions from 0–135°, with no modeled upper/lower intersection and a minimum computed distance of approximately 0.486 mm.
Those are different assemblies. The tabletop result does not validate the wearable elbow, manufacturing tolerances, spring assistance, or a human-bearing joint.
Inspect the original spring record ↗04 / ROADMAP
Progress by evidence.
Not by a countdown.
AVAILABLE / P01.4 + R03
Geometry, screens & public workbench
Original CAD, estimated human models, recorded issues, a polished 3D presentation, and this static project website.
DRAFT / D01
Service architecture & bench coupons
Wiring reservations, module concepts, power-domain proposals, a channel base/lid, and an accessory backplate. No physical validation.
NEXT MECHANICAL WORK
One complete access mechanism
A retained clear-then-swing hinge, real latch, padded human envelope, and full opening-path checks. Personal fit measurements are needed.
BEFORE A WEARABLE ASSEMBLY
Support, manufacturing & off-body tests
Continuous load path, casting trials, spring strategy, retained hardware, reviewed failures, and controlled bench testing.
LATER
Progressive integration & AR
Low-load supervised development, incremental cast panels, then hardware-specific optical fitting when a suitable headset exists.
New website. Same mechanical honesty.
R44 changes presentation and adds draft systems documentation and unloaded service coupons. P01.4 suit solids, spring findings, and collision evidence remain unchanged.